ers

 

HOME

Front Fenders

Support Rear

Sissy Bar

Body Shop

Ordering and shipping details

CHOPPER and CUSTOM

REAR FENDERS


SPECIAL REDUCED PRICE

7" Rear Fender Round Profile Center Bead

501578 Fender has a small dimple near the rear of the fender. Click Pic to see detail.
Round profile chopper raw fender is 7" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Radius Length: 34" , Tip to Tip: 27-5/8" , Side Wall Height: 1-1/4" , Side to Side Width: 7" , Radius Width: 9-1/2" , Thickness: .9mm

Item# 501578 , $119.95 , +$20 S&H

Reg Price $149.95
 

 


FLAT FENDERS

FLAT FENDERS, RAW/UNFINISHED

Rolled of 16 gauge steel, available in 5”, 6”, 7" widths and may require trimming and finishing for chain relief. Unfinished Heavy Duty. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and painting, after fender is test fit for ease of installation.
Fits: Custom application

Measurements
Overall Length: 43" , End to End Length: 29-5/8" , Height: 12". The 5” and 6” fenders are 1-1/4 deep, the 7” is 1-7/8" deep.

Item# 500160, W=5”, $69.99 +$25 S&H

500162, W=6”, $58.99 +$25 S&H

SOLD OUT500159, W=7”, $59.99 +$25 S&H
 
 
 

FLAT FENDER, Chrome

500161
6" wide heavy duty rear flat fender is rolled of 16 gauge steel with a chrome finish. Fender is 1-1/4" deep.
Fender may require trimming and finishing for chain relief.
Fits:
Custom application

Measurements
Overall Length: 43" , Width: 6" , Depth: 1-1/4" , End to End Length: 29-5/8" , Height: 12"

Item# 500161 , $95.99+$25 S&H

 
 

Click pic for larger images

FLAT FENDER REAR BOBBED

Unfinished heavy duty rear bobbed flat fender is rolled of 16 gauge steel. Bobbed flat fender available in 6", 7-1/2", 8-1/2", 9" Widths. Fender may require trimming and finishing for chain relief.

RAW/Unfinished. End to end= 29.75", over the top length= 41.5" , Height 12".

6" Fender is 1-1/4" deep, 7-1/2" thru 9" are 1-7/8" deep.

Item# 500166, W=6” Bobbed, $65.95 +$25 S&H

500208, W=7.5” Bobbed, $119.95 +$125 S&H

500209, W=8.5” Bobbed, $119.95 +$25 S&H
500243, W=9” Bobbed, $119.95 +$25 S&H
 

 
 

U-CLAMP SET

Chrome U Clamps Set with chrome carriage bolts for Rigids / hardtails. Secures rear fender to 1” frame cross tube.

Item# 310190, $16.95

 

FREE S&H with fender order
 

ROUND PROFILE FENDERS

6" Rear Fender Round Profile Center Bead

501579
Round profile chopper raw fender is 6" wide and ribbed type with 1/2" wide center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Length Tip to Tip: 27-1/2" , Width: 6" , Thickness: .9mm

Item# 501579 , $149.95 , +$20 S&H

 
 

7" Rear Fender Round Profile Center Bead

501578
Round profile chopper raw fender is 7" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Radius Length: 34" , Tip to Tip: 27-5/8" , Side Wall Height: 1-1/4" , Side to Side Width: 7" , Radius Width: 9-1/2" , Thickness: .9mm

Item# 501578 , $149.95 , +$20 S&H

 
 

8" Rear Fender Round Profile Center Bead

501580
Round profile chopper raw fender is 8" wide and ribbed type with 1/2" wide center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Radius Length: 34" , Tip to Tip: 27-5/8" , Side Wall Height: 1-1/4" , Side to Side Width: 8" , Thickness: .9mm

Item# 501580 , $149.95 , +$20 S&H

 
 

9" Rear Fender Round Profile Center Bead

501581
Round profile chopper raw fender is 9" wide and ribbed type with 1/2" wide center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Length: 27-1/2" , Width: 9" , Height: 7" , Thickness: .9mm

Item# 501581 , $149.95 , +$25 S&H

 
 

10" Rear Fender Round Profile Center Bead

501582
Round profile chopper raw fender is 10" wide and ribbed type with 1/2" wide center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Length: 27-1/2" , Width: 10" , Height: 7" , Thickness: .9mm

Item# 501582 , $149.95 , +$25 S&H

 
 

Custom SABRE FENDER REAR , 9"

500038
9" custom round profile rear fender comes in a raw steel finish.
Fender is 2mm thick and spacing may be required. We suggest pre fitting the fender prior to painting.
Fits:
Custom application for 200 rear tire

Measurements
Length: 27"

SOLD OUT Item# 500038WG 9"W , $89.99 , +$22 S&H

SOLD OUT

Custom SABRE FENDER REAR , 11.5"

502044
Custom round profile Sabre rear fender comes in a raw steel finish. Fender is 2mm thick by 11-1/2" wide.
Fender spacing may be required. We suggest pre fitting the fender prior to painting.
Fits:
Custom application


Item# 502044WG 11-1/2"W , $189.99 , +$25 S&H

 

Rear Fender Smooth Pro Stretch 11"

502045
Smooth rear Pro streched fender is constructed of 2mm thick steel and has a raw finish. Fender measures 11" wide.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application


Item# 502045WG 11"W , $156.99 , +$25 S&H

 

Custom ROUND PROFILE FENDER REAR

502046
Round profile custom rear fender is constructed of steel and has a raw finish. Fender is 11" wide.
Fender spacing may be required. We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Item# 502046 11"W , $189.99 , +$25 S&H

 

STRUTLESS FENDERS

STRUTLESS REAR FENDER Short

7-1/2" for 160 Tire, 2mm steel fender for ST and frames that measure 11" where struts attach.

Item# 500576 , $259.95 , +25 S&H

    

 
 

Same as above, WELD-ON version

STRUTLESS REAR FENDER

8-1/2" for 180 Tire, Weld-on unit, 2mm steel fender for ST and frames that measure 11" where struts attach.

Item# 500257WG, $259.95 , +20 S&H

SOLD OUT
 

STRUTLESS REAR FENDER

9"Width for 200 Tire, 2mm steel fender for ST and frames that measure 11-3/4" where struts attach.

Item# 500216 , $299.95 , +$25 S&H

    

 
 

STRUTLESS REAR FENDER

9"Width for 200 Tire, 2mm steel fender for ST and frames that measure 11" where struts attach.

Item# 500251WG , $339.95 , +$25 S&H

 
 

STRUTLESS REAR FENDER

9"Width for 200 Tire, 2mm steel fender for ST and frames that measure 11" where struts attach.

Item# 500240 , $249.95 , +$25 S&H

 
 

STRUTLESS REAR FENDER

10" width for 230 Tire, 2mm steel fender for ST and frames that measure 11" where struts attach.

Item# 500217 , $249.95 , +$28 S&H

  

 
 

STRUTLESS REAR FENDER

11" width for 250 Tire, 2mm steel fender for ST and frames that measure 11" where struts attach.

SOLD OUT Item# 500230 , $249.95 , +$29 S&H

 

 
 

STRUTLESS REAR FENDER

500242
Strutless rear fender is 2mm thick, has a width of 12.75" and is constructed of steel. Fender will cover 280-300 series tire.
Completely self-supporting these strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it attaches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. Pre fit fender before painting.
Fits:
Custom application for 280 and 300 Tire on Softail frame

Item# 500242 , $159.95 , +$29 S&H

   

 
 

SMOOTH STYLE FENDERS

REAR FENDER SMOOTH 10"W

500213
Fender is constructed of steel is 10" wide x 34" long , 27-1/2" end to end. Fender is smooth formed and not drilled for builders application.
May require fender spacing. We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Item# 500213 , $159.95+$15 S&H

 

 
 

REAR FENDER SMOOTH 11"W

500214
Fender is constructed of steel is 11" wide x 38" long , 29" end to end. Fender is smooth formed and not drilled for builders application.
May require fender spacing. We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Item# 500214 , $179.95+$15 S&H

 
 

Click pic for more detail

REAR FENDER SMOOTH 12.75"

502052
Rear fender is constructed of steel with raw finish. Fender is smooth formed and not drilled for builders application.
Fender measures 12-3/4" wide x 38" long. May require fender spacing. We suggest pre fitting the fender before painting.
Fits:
Custom application for 250 and 300 Tire , 27-1/2" end to end

Item# 502052 , $104.95+$19 S&H

 

 
 

REAR FENDER SMOOTH 12.75"

502054
Rear fender is constructed of steel and has a raw finish. Fender is smooth formed and not drilled for builders application.
Fender measures 12-3/4" wide X 38" long, tip to tip. May require fender spacing. We suggest pre-fitting fender prior to painting.
Fits:
Custom application for 250 and 300 Tire , 27-1/2" end to end, left cut

Item# 502054 , $234.95+$15 S&H

 
 

REAR FENDER SMOOTH 13.5"

500244
Fender is constructed of steel and is 13-1/2" wide x 38" long , 27-1/2" end to end. It is smooth formed and not drilled for builders application.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application for 330 Tire

Measurements
Width: 13-1/2" Length: 38" End To End: 27-1/2"

Item# 500244 , $189.95+$25 S&H

 
 

STRETCH FENDERS

PRO-STRETCH FENDER REAR

2mm Steel fender is 11" wide

Item# 502045 , $179.99 +$20 S&H

Select item(s)
STRUT SET

Curved Strut Set Chrome to mount Pro Stretch 11" fenders on ST Frames

Item# 500583 , $245.95 FREE S&H When ordered with fender


BOBBED FENDERS

9" Bobbed REAR FENDER

2mm Steel rear fender 9"width to fit struts on 86-99 FXST wide style frames , for 200 Tire

Item# 500112 9"W , $164.99 , +$18 S&H

 

Bobbed REAR FENDER

2mm Steel rear fender can be used on ST style struts available in 11"Wx41"L , 32" end to end

Item# 502038 , 11"W , $239.99 , +$20 S&H

 

Bobbed FENDER for RIGIDS

2mm Steel rear fender available in 7-1/4" width x 5-1/2" deep , Left cut-out , 500928 includes bracket for tail lamp and license plate

Item# 500152 no Brkt, $64.99 , +18 S&H
Item# 500928 w/Brkt , $72.99 , +18 S&H

Select Width

 

 

FENDER HARDWARE

FENDER MOUNT KIT

Bolts, rubber bushings and flush nuts

Item# 310718 , $7.95 +$2 S&H

 

FREE S&H With ANY fender order
 

WELD ON MOUNT SPOOL

5/16 x 24 thread

Item# 510588 , $19.95 +$2 S&H

FREE S&H With ANY fender order
 

FENDER U_CLAMPS

Secures rear fender to frame cross bar, replaces OEM 59800-36, Chrome or Parkerized, clamps only, order carriage bolts separately

Item# 310190 Chrome , $16.95
Item# 310457 Parkerized , $28.99

Select Finish
FREE S&H With ANY fender order
 

CARRIAGE BOLTS Chrome

Chrome carriage bolt set of 4

Item# 371507 , $8.95

FREE S&H With ANY fender order
 

Wide FENDER WASHERS

Rubber washers are , 2" diameter, for 1/4" or 5/16" and sold in packs of 20

Steel Fender Washers are 1-1/4" diameter with 5/16" hole and sold in packs of 10

Item# 378869 Rubber(20)1/4" , $8.99
Item# 378870 Rubber(20)5/16" , $9.99
Item# 400604 Steel(10)5/16 , $7.99

Select type
 
FREE S&H With ANY fender order
 

 

 

Rear Fender Round Profile Center Bead

501579
Round profile chopper raw fender is 6" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.
Fits:
Custom application

Measurements
Length Tip to Tip: 27-1/2" , Width: 6" , Thickness: .9mm

Item# 501579 , $149.95 , +$20 S&H

 
 

 

Questions? info@phantomkustom.com , please be sure to include the item# in all emails!

Mail to:: Phantom Kustom :: PO BOX 260 :: Marlboro, NY 12542

Email :: info@phantomkustom.com

HardNox Web Design